2007-04-19 1 bar1.../bar61... silicon pin diode ? rf switch, rf attenuator for frequencies above 10 mhz ? low distortion faktor ? long-term stability of electrical characteristics ? pb-free (rohs compliant) package 1) ? qualified according aec q101 bar14-1 bar16-1 bar61 bar15-1 type package configuration l s (nh) marking bar14-1 bar15-1 bar16-1 bar61 sot23 sot23 sot23 sot143 series common cathode common anode pi element 1.8 1.8 1.8 2 l7s l8s l9s 61s maximum ratings at t a = 25c, unless otherwise specified parameter symbol value unit diode reverse voltage v r 100 v forward current i f 140 ma total power dissipation t s 65c p tot 250 mw junction temperature t j 150 c operating temperature range t op -55 ... 125 storage temperature t stg -55 ... 150 thermal resistance parameter symbol value unit junction - soldering point 2) r thjs 340 k/w 1 pb-containing package may be available upon special request 2 for calculation of r thja please refer to application note thermal resistance
2007-04-19 2 bar1.../bar61... electrical characteristics at t a = 25c, unless otherwise specified parameter symbol values unit min. typ. max. dc characteristics reverse current v r = 50 v v r = 100 v i r - - - - 100 1000 na forward voltage i f = 100 ma v f - 1.05 1.25 v ac characteristics diode capacitance v r = 0 v, f = 100 mhz v r = 50 v, f = 1 mhz c t - - 0.2 0.25 0.5 0.5 pf zero bias conductance v r = 0 v, f = 100 mhz g p - 50 100 s forward resistance i f = 0.01 ma, f = 100 mhz i f = 0.1 ma, f = 100 mhz i f = 1 ma, f = 100 mhz i f = 10 ma, f = 100 mhz r f - 300 35 5.5 2600 470 55 8 4200 - 85 12 ? charge carrier life time i f = 10 ma, i r = 6 ma, measured at i r = 3 ma, r l = 100 ? rr 700 1000 - ns i-region width w i - 146 - m
2007-04-19 3 bar1.../bar61... diode capacitance c t = ? ( v r ) f = parameter 0 0.0 ehd07067 bar 14-1...16-1 c t r v 0.5 pf 1.0 f = 1 = 100 f mhz mhz 10 20 30 40 v 50 forward resistance r f = ? ( i f ) f = 100mhz 10 ehd07066 bar 14-1...16-1 r f f -2 2 10 ma 0 10 ? 10 4 10 1 10 2 10 3 -1 10 0 10 1 10 forward current i f = ? ( v f ) t a = 25c 0.0 10 ehd07065 bar 14-1...16-1 f f v -2 -1 10 0 10 1 10 10 2 ma -40 ?c t a = 25 150 85 0.5 1.0 v 1.5 ?c ?c ?c forward current i f = ? ( t s ) bar14-1, bar15-1, bar16-1 0 15 30 45 60 75 90 105 120 c 150 t s 0 20 40 60 80 100 120 ma 160 i f
2007-04-19 4 bar1.../bar61... application circuit for attenuation networks with diode bar61 ehm07026 bar 61 bc 238 v reg. +12 v output input 1 nf ? 1 k ? 1 k 1 nf 50 k ? 1 nf 1 nf 1 nf ? 5.6 k 4.7 k ? 1 nf ? 12 k 1 nf 1 nf ? 1.8 k 2.2 k ?
2007-04-19 5 bar1.../bar61... package sot143 package outline foot print marking layout (example) standard packing reel ?180 mm = 3.000 pieces/reel reel ?330 mm = 10.000 pieces/reel rf s 2005, june date code (ym) bfp181 type code 56 pin 1 0.8 0.8 1.2 0.9 1.1 0.9 1.2 0.8 0.8 0.8 -0.05 +0.1 1.9 1.7 0.1 2.9 +0.1 -0.05 0.4 0.1 max. 12 3 4 0.25 m b 0.1 1 10? max. 0.15 min. 0.2 a m 2.4 0.15 0.2 10? max. a 1.3 0.1 0...8? 0.08...0.15 2.6 4 3.15 pin 1 8 0.2 1.15 b manufacturer
2007-04-19 6 bar1.../bar61... package sot23 package outline foot print marking layout (example) standard packing reel ?180 mm = 3.000 pieces/reel reel ?330 mm = 10.000 pieces/reel eh s bcw66 type code pin 1 0.8 0.9 0.9 1.3 0.8 1.2 0.25 m bc 1.9 -0.05 +0.1 0.4 0.1 2.9 0.95 c b 0...8? 0.2 a 0.1 max. 10? max. 0.08...0.15 1.3 0.1 10? max. m 2.4 0.15 0.1 1 a 0.15 min. 1) 1) lead width can be 0.6 max. in dambar area 12 3 3.15 4 2.65 2.13 0.9 8 0.2 1.15 pin 1 manufacturer 2005, june date code (ym)
2007-04-19 7 bar1.../bar61... edition 2006-02-01 published by infineon technologies ag 81726 mnchen, germany ? infineon technologies ag 2007. all rights reserved. attention please! the information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (?beschaffenheitsgarantie?). with respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, infineon technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. information for further information on technology, delivery terms and conditions and prices please contact your nearest infineon technologies office ( www.infineon.com ). warnings due to technical requirements components may contain dangerous substances. for information on the types in question please contact your nearest infineon technologies office. infineon technologies components may only be used in life-support devices or systems with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
|
